LOREX Technology instruction manual SG17L7584 Back, Slave Monitor

SG17L7584 - Back

SG17L7584 - Back

1 2 3 4

5 6 7

1.RCA AUDIO INPUTS - Channel 1-8 Audio inputs (for non-DIN type cameras with standard RCA Audio output).

2.BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras with BNC connection type), or can be used for Looping Video Output to a DVR

NOTE: When DIN type cameras are connected on a channel, the BNC CONNECORS serve as LOOPING VIDEO OUTPUTS, and will send video to another device (such as a DVR or

SLAVE MONITOR).

3.6 PIN DIN CAMERA INPUTS - Channel 1-8 Camera inputs (for cameras with 6 pin DIN connection). Cameras can be connected using either 6 PIN DIN or BNC (Video) and RCA (Audio) terminals.

4.ALARM FUNCTION TERMINALS (INPUT/OUTPUT) - These terminals are used to connect external alarm devices such as a motion sensor, door/alarm sensor, or time lapse VCR for Alarm Recording.

5.DVR / VCR AUDIO AND VIDEO IN - Use with A/V cables (not supplied) to receive audio and video from an external source (DVR/VCR)

6.DVR / VCR AUDIO AND VIDEO OUT - Use the A/V cables (not supplied) to send audio and video from the monitor to a DVR/VCR

7.SLAVE A/V OUT - Audio/Video Output signal for transmitting to a slave Monitor or VCR

14