INSTALLATION - Cont’d.
24 V. | Gas Baseboard |
Thermostat |
|
| Gas Baseboard |
| Gas Baseboard |
When wiring more than one baseboard heater to a single thermostat, the baseboard heaters must be wired in PARALLEL. When wiring more than one baseboard heater to a single 24 VAC thermostat, the baseboard heaters must be hard wired in parallel. Do not use cord sets. Do not cross thermostat connections between heaters. Purple thermostat connection from first heater to purple thermostat on second and third heater. Do the same with white thermostat connection.
FIGURE 10
e)The anticipator setting on the thermostat should be equivalent to the current draw of the total number of valves being controlled.
NUMBER OF BASEBOARD HEATERS | ANTICIPATOR SETTING |
1 | .1 AMP |
2 | .2 AMP |
3 | .3 AMP |
|
|
STEP 7. COMPLETING INSTALLATION
a)Connect gas supply line to flex gas
b)Turn gas supply on. Check connections with soapy solution.
c)Plug power cord into grounded 115 V. outlet or turn power on if hard wired.
d)Replace cabinet cover and secure with three screws at bottom.
Heater is now installed, follow lighting instructions to put heater in operation.
During initial
Page 10
