Lowrance electronic HDS-5, HDS-7 107, Serial Ports, To configure serial ports, Nmea 0183 Output

Settings

Serial Ports

Configures communication ports to send or receive data with another electronic device, like an autopilot.

To configure serial ports:

1.Highlight Serial Ports on the Network menu and press enter. The Serial Settings menu will appear.

2.Select the desired setting (Protocol,

Communication Port 1 or Communication

Port 2) and press Enter.

3. Use the keypad to select the desired option Serial settings menu and press enter.

4. Highlight OK and press enter.

NMEA 0183 Output

Controls NMEA 0183 sentences used, allowing you to select the type of messages your unit will transmit when communicating with other NMEA 0183 devices. The default setting will work well under most conditions.

To access NMEA 0183 Output screen:

1.Select NMEA 0183 Output from the Network menu and press enter.

2.Highlight a desired sentence and press enter to turn it on/off.

3.To finalize changes, select OK and press enter.

NMEA 0183 Output screen

107