Lowrance electronic HDS-5, HDS-7 manual Trails screen, To Search for Route by Name

Chart

To Search for Route by Name:

1.From the Routes screen press MENU. The Routes screen menu will appear.

2.From the Routes screen menu select Find. A keypad will appear. Use the keypad to enter the name of the route you are searching for and press OK.

Trails

A trail is a record of the path you have traveled. Trails not only show you where you have been, they can be used to retrace your path back to your starting point. On the Chart page a trail is presented by a solid line extending from the back of the current position icon.

From the factory, the unit is automatically set to create and record a trail when the unit is turned on and you are navigating. The unit will continue to record a trail until the trail length reaches the maximum trail point setting.

When the unit reaches the maximum trail point number it will automatically begin recording the trail over itself. By default, the unit places a dot (trail point) on the Chart page every time you change course.

Trails screen

To view stored trails go to the Trails screen in the Utilities page. From the Trails screen you can view and edit stored trails.

Trail name	Trail color
	Number of Trail
	points.
Indicates if Trail is displayed	Indicates if Trail is
on Chart page.
	being recorded.

51