Settings

Route

Allows you to select a route to be used during a simulation.

To select a route:

1.Select Route from the Advanced menu and press enter. A Route List will appear.

2.Use the keypad to select the desired route and press enter.

Set Start Position

Sets the starting point of a GPS Simulation to the cursor position.

To set start position:

1.Highlight the Set Start Position button on the Advanced menu and press enter.

2.Select the Set button and press enter.

3.Highlight OK and press enter.

Restore Defaults

Switches Advanced simulator options back to defaults settings. To restore defaults, select Restore Defaults from the Advanced menu and press enter.

112

Page 114
Image 114
Lowrance electronic HDS-7, HDS-5 manual 112