
Specifications
GENERAL
Case Size:
•
10.2 cm), 2.30 lbs
•
Display:
•
•
Backlighting:
•
•
Supply voltage: 10 to 18 volts DC
Supply current:
•
•
Operating temperature: -15°C to 55°C (5°F to 130°F)
MMC slots: Two with waterproof doors. One reads SD, MMC, and MMC+. One reads SD and MMC.
Audible alarms: Local and networked alarms available for included and optional components, including sonar, GPS/naviga- tion, battery voltage, weather, engine/trans- mission, tank level, AIS and DSC.
Communications: NMEA 0183 input and output up to 38,400 baud, NMEA 2000, Navico Ethernet
Standards compliance:
•Waterproofing: IPX6 and IPX7 with card door closed
•EMC: IC
IEC60945
BROADBAND SOUNDER
Frequency: 50/200 kHz or 83/200 kHz
Power output: 250W Peak to Peak (31W RMS) actual, 30,000W Peak to Peak analog equivalent
Unit Care
Depth capability: 5,000 ft dependent on transducer configuration and installation, bot- tom composition and water conditions
Surface water temperature: Available built into transducer or via external network
Paddlewheel speed log: Available with optional speed sensor
Audible alarms: Shallow, Deep, Tempera- ture change
GPS NAVIGATION
Receiver/antenna:
•Built in 16 parallel channel internal antenna
•External antennas supported via NMEA 0183 and NMEA 2000
Satellite DGPS: WAAS, EGNOS, MSAS supported
Compass Safe Distance: 20cm (8 inches)
Charting: Contains
Position updates: Every second with inter- nal antenna
Chart scale: 50ft (20m) to 2,500 nautical miles (3,000 miles)
Audible alarms: Arrival,
NOTE: The above memory ca- pacities refer only the unit’s
MMC cards you have.