Lowrance electronic HDS-5, HDS-7 manual Reset Water Distance, To select a Transducer Type

Settings

To select a Temperature Averaging interval:

1.Highlight the Temperature Averaging box on the Installation menu.

2.Press the keypad left/right to select the desired interval and press enter.

Reset Water Distance

If you connect a paddlewheel speed sensor to your unit, you can track the distance you travel on the water. Reset Water Distance, resets water distance to zero.

To reset water distance, highlight Reset Water Distance and press ENTER.

Transducer Type

Selects the transducer model connected to your display unit. In some transducers with built-in temperature sensors, the temperature may not be accurate if the correct transducer is not selected from the Transducer Type menu.

To select a Transducer Type:

1.Highlight Transducer Type box on the

Installation menu and press enter. The Select Transducer menu will appear.

2.Use the keypad to your transducer type and press enter.

3.Highlight OK and press enter.

Transducer type menu

85