Lowrance electronic HDS-5 manual Sonar Settings Menu, Sonar Source, Network Sonar, Noise Rejection

Settings

Sonar Settings Menu

The Sonar Settings Menu is used to modify Sonar options and display settings like Sonar Source, Noise Rejection and Fishing Mode.

To access the Sonar Settings:

1.Press MENU twice.

2.Select Sonar and press ENTER.

Sonar Source

Sonar Settings Menu

Selects the display unit that will be used for sonar data. Sonar Source allows you to view selected transducer data on every display unit on the ethernet network; even non-sonar units, like the GlobalMap. If you had an ethernet network and two transducers — one at the bow and one in the back of the boat — you could view sonar data from either transducer at the helm via the Sonar Source feature.

To select a Sonar Source:

1.Highlight Sonar Source from the Sonar Settings menu and press ENTER. The Sonar Source menu will appear.

2.Use the keypad to select the desired option and press enter.

Network Sonar

Allows your unit to send/receive data from another sonar unit on an ethernet network. To turn on/off network sonar, highlight Network sonar on the Sonar Settings menu and press enter.

Noise Rejection

Sonar signal interference from Bilge pumps, engine vibration, air bubbles, etc., can clutter your unit’s display. Noise Rejection counteracts sonar signal interference by reducing onscreen clutter.

To adjust Noise Rejection:

1.Highlight Noise Rejection on the Sonar Settings menu and press

ENTER.

2.Use the keypad to select the desired option and press enter.

79