Lowrance electronic HDS-5, HDS-7 Edit Mode, Move or Placing a Gauge, To move or place a gauge

Pages

Edit Mode

When a gauge is added to the display it will be shown in edit mode. Analog and bar gauges are shaded in blue when they are in Edit Mode. Digital Gauges will be shown with a blue border.

Analog gauge in edit	Digital gauge in edit mode
mode

Move or Placing a Gauge

The Move gauge command allows you to move data overlay to any position on the screen. When you use the Place gauge command, the gauge will be locked in its current position.

To move or place a gauge:

1.Press the Enter key when the gauge is in Edit mode. Four directional arrows will appear when the gauge can be moved.

2.Use the keypad to move the gauge to a desired location on the screen.

3.Press Enter to place the gauge.

Select Data

Used to select data that will be shown on the data overlay display. When selecting data you first will open a main data category and then choose data to be displayed from the a data subcategory.

13