Lowrance electronic X-70A 3D manual Speaker Volume, Units of Measure

“Adjust Back Light Level” label. The screen shown at right ap- pears. Now press the left ar- row key to decrease the light level. Press the right arrow key to increase it.The percentage of back light in use changes as the arrow keys are pressed. The bar chart also gives a graphical indication of the level. After you’ve made the adjustment, press the CLR key to erase the menu.

SPEAKER VOLUME

To adjust the X-70A 3D's speaker volume, press the MENU key twice, then press the key next to the “Adjust Speaker Volume” label. Now press the left arrow key to decrease the level, the right arrow key to increase it. The percentage of volume in use changes as the arrow keys are pressed. The bar chart also gives a graphical indication of the level. After you’ve made the adjustment, press the CLR key to erase the menu.

UNITS OF MEASURE

When the optional speed/temperature sensor is connected, the X-70A 3D can display the water depth in feet, fathoms, or meters, surface water temperature in degrees Fahrenheit or Celsius, speed in statute miles per hour, kilometers per hour, or knots, distance (log) in miles, kilometers, or nautical miles, and the 3D distance markers in feet or meters.

To change the units of measure, first press the menu key two times. Next, press the key adjacent to the “Units of Measure” label. The screen shown below appears. The check

mark in the box on each line shows the unit of measure currently in use. In the screen shown below, the units of mea- sure are in feet for the depth, temperature in degrees Fahr- enheit, speed is in statute miles per hour, and log is in statute miles.

Press the key adjacent to the unit that you wish to change.

30