Lowrance electronic X-70A 3D manual Fishtrack, Temperature Graph Adjustment

FISHTRACK ON

The ASP feature has two lev- els - Low and High. If you have high noise levels, try using the “High” ASP setting. However, if you are having trouble with noise, we suggest that you take steps to find the interfer- ence source and fix it, rather than continually using the unit with the high ASP setting. However, there are times when you may want to turn the ASP feature off. This allows

you to view all incoming echoes before they are processed by the ASP feature.

To change the ASP level, press the MENU key three times. Then press the key next to the “ASP” label until the desired level is obtained. Press the CLR key to exit this menu.

FISHTRACK™

When the X-70A 3D is in the 2D or 3D modes and the Fish ID feature is on, the depth of the fish symbols can easily be determined using the FishTrack™ feature. This places the depth above the fish symbol as it appears on the screen. It is normally on when the unit is turned on. To turn the FishTrack™ feature off, press the MENU key two times. Now press the key next

to the “FishTrack” label. This moves the check mark from the “ON” box to the “OFF” box. To turn it on again, repeat the above steps.

TEMPERATURE GRAPH ADJUSTMENT

The temperature graph that appears beneath the digital surface water temperature display has a range from 5 degrees higher than the current temperature to 5 degrees lower than the current temperature, for a total of ten degrees.This range can be changed from ten to two or four degree.To change the temperature graph range, press the MENU key three times, then press the key next to the "Temperature Graph" label until the check

32