Lucent Technologies partner advanced communications system manual PARTNER-6 Telephone

Form C Supplemental Instructions:	8
Button Templates

There are eight pages to Form C—one page for each type of system phone and one page for an Intercom Autodialer. Use Form C to record line button assign- ments and to indicate programming for system telephone buttons that do not have lines assigned if the programming is to be performed from extension 10 or 11 during system installation. After installation, users can program additional features using the instructions on their Quick Reference Cards.

A telephone button can be programmed as a line button (to access an outside line), as an Auto Dial button (to dial a phone number or a PBX/Centrex feature access code with one touch), or as a dial-code feature button (to access a dial- code feature with one touch). Line buttons must have status lights; some fea- tures also require buttons with lights (see “Button Feature Summary”).

Using the information from Line Ringing and Line Access Restriction on Form B2, fill out Form C as follows:

■Make as many copies of each page of Form C as you need. Where line and other button assignments are identical for two or more phones of the same type, you can use one copy of the form and indicate the extension numbers sharing the programming in the space provided at the bottom of the form.

■Use either the button template (to record the exact location of buttons and the programming assigned to them) or the Check Desired Features checklist (to identify features to be programmed), or both. By default, lines are assigned to buttons in the following order:

PARTNER-34D Telephone
13	14	15
7	8	9	10	11	12
1	2	3	4	5	6
PARTNER-18D and PARTNER-18 Telephones
13	14	15
9	10	11	12
5	6	7	8
1	2	3	4

PARTNER-6 Telephone

34

12

MLS-34D Telephone
13	14	15
9	10	11	12
5	6	7	8
1	2	3	4
MLS-18D, MLS-12D, and MLS-12 Telephones
13	14	15
9	10	11	12
5	6	7	8
1	2	3	4
NOTE: On MLS-12D and MLS-12 telephones, only buttons 1 through 10
have lights and can have lines assigned.
MLS-6 Telephone
1	2	3	4

■Indicate the order in which a line is selected when the user lifts the handset or presses Sto place a call without first pressing a line or button (Auto- matic Line Selection) if the order is to be different than the default (outside lines in ascending numerical order followed by intercom).