Form A: System Configuration PAGE

2 of 2

Required for PARTNER Advanced Communications System. For additional instructions, see pages 3 and 4.

8.System Settings. Write response on line for each item.

Receptionist answers calls during business hours? Write “Yes” or “No” ______.

Number of Lines {#104}—By default, 3 lines per PARTNER ACS processor module, 2 lines per 206 module and 4 lines per 400 module are assigned to each extension. Write number if different from default ______.

Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going to the transfer return extension. Write number (0-9, 0 = no return) if different from default ______.

Outside Conference Denial {#109}—By default, a conference call can include 2 outside parties. Write “No” if 2 outside parties are not allowed ______.

VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s mailbox. Write number (1-9) if different from default ______.

Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred. Write “NA” if Music on Hold or silence is desired ______.

Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a long distance call. Write “No” if 0 or 1 is not required ______.

System Password {#403}—By default, no password is programmed to override dialing restrictions and to turn Night Service on and off. Write 4 digits if password is desired __ __ __ __.

Star Code Dial Delay {#410}—By default, the system inserts a 0 second delay after a valid Central Office star code when it autodials. Write number (1–5) of seconds if a longer delay is desired or “NO” if this feature should not be active ______.

Music on Hold {#602}—By default, the Music on Hold jack on the processor module is active. Write “No” if the jack is deactivated ______.

9.Line Coverage.

If VMS-AA is checked on Form A, Item 7, specify the following:

VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write “Del” if calls ring 4 times before VMS answers _____.

VMS Hunt Schedule {#507}—By default, VMS is on all the time. Check if Day only or Night only is desired:

Day only

Night only

10.Auxiliary Equipment (System). Check if applicable:

Battery Backup

Caller ID Devices

Loudspeaker Paging: Number of zones ______________

Magic on Hold (Music on Hold {#602} must be active.)

Uninterruptible Power Supply

SMDR. If checked, specify the following if appropriate:

SMDR Record Type {#608}—By default, all calls are included on call reports. Write “Out” if only outgoing calls are reported _________.

SMDR Output Format {#610}—By default, up to 15 digits are printed for dialed numbers in the Number field of the call report. Write “24” if a maximum of 24 digits is desired _________.

PARTNER Contact Closure Adjunct. If checked, write in the number (1-4) below to specify Operation Type for each Contact Closure as appropriate:

OperationType

Contact

Contact

{#613}

Closure 1

Closure 1

1 = 1 second on

2 = 3 seconds on ()

3 = 5 seconds on

4 = Toggle

Backup/Restore PC Card. If checked, write “Active” if Automatic System Programming Backup {#123} is desired _________.

11.Notes: Write any additional information that you want to communicate to the installer.

12. Installation Date

13. Order Nos.

14. Sales Support Representative’s Name

Telephone No.

Page 20
Image 20
Lucent Technologies partner advanced communications system manual = 1 second on = 3 seconds on = 5 seconds on = Toggle