Lucent Technologies partner advanced communications system manual Dial-Code Features

12

Dial-Code Features

Account Code Entry ACEf12

Allows the user to enter an account code for a call by pressing the button, entering up to 16 digits for the account code, then pressing the button again. If on a button with lights, the lights show when the feature is in use.

Background Music Music f19

Turns background music on and off at the speaker of an idle system phone. If on a button with lights, the lights show when the feature is in use.

Call Forwarding/Call Follow-me CF-xx xx f11xx

xx

Forwards all calls to the designated extension. Unless Do Not Disturb is on, phone beeps once each time a call is forwarded. You may program originating and destination extension numbers on the button. If on a button with lights, the lights show when the feature is in use.

Call Park Park ixx

Parks a call at a specific extension so it can be picked up from any other extension.

Call Pickup Pickup-xxi6xx

Picks up a ringing or parked call at the designated extension.

Caller ID Inspect ID-Inspect f17

When a user at a display phone is already on a call, this feature shows Caller ID information for another line (if Caller ID information is available on that line), without disconnecting the current call or putting it on hold. When the feature is active, the button light is on.

Caller ID Name Display ID-Name f16

When a user at a display phone is on a call on a line that has Caller ID information available, this feature lets the user switch between the caller’s telephone number (the default display) and the caller’s name (if available). When the feature is active— indicating that the caller’s name should be displayed—the button light is on.

Conference Drop Dropf06

Drops the last outside party added to a conference call.

Contact Closure 1 CC1f41

Allows user to activate Contact Closure 1. User must belong to Contact Closure Group. See Form B1.

Contact Closure 2 CC2f42

Allows user to activate Contact Closure 2. User must belong to Contact Closure Group. See Form B1.

Direct Line Pickup—Active Line DLPA i68

Allows the user to access a ringing, active, or held call on a line that is not assigned to the extension. Direct Line Pickup is subject to Line Access Restrictions programmed for the extension.

Direct Line Pickup—Idle Line DLPI i8

Allows the user to access an idle (non-busy) line that is not assigned to the extension. Direct Line Pickup is subject to Line Access Restrictions programmed for the extension.

Do Not Disturb DNDf01

Prevents calls from ringing at the extension. When the feature is active, the button light is on. Intercom calls get a busy signal, and outside callers hear ringing. Use only if someone else answers the extension’s outside calls.

If VMS Cover and Do Not Disturb are both active, intercom, transferred, and outside calls on owned lines go directly to the extension’s voice mailbox.

Exclusive Hold ExHold f02

Places a call on hold and prevents other extensions with the line from picking it up.

Group Calling—Page GCallP- g i*7g

Places a voice-signaled intercom call to all extensions in the designated Calling Group (no transfer capability). The caller is connected to the first extension that answers. g = 1–4

Group Calling—Ring GCall- g i7g

Places a ringing intercom call to all extensions in the designated Calling Group. The caller is connected to the first extension that answers. Also can be used to transfer a call to an extension in the group. g = 1–4