Lucent Technologies USS-720 Evaluation Kit Contents continued, Hardware Requirements, Instant USB

Information Manual, Rev. 1	Evaluation Kit for USS-720	Instant USB
September 1999	USB-to-IEEE	1284 Bridge

Evaluation Kit Contents (continued)

■ \Win98:
— USS720.INF	// ISD USB Smart Cable Install file
— USS720.SYS	// Release version of USS-720 USB Device Driver for Windows 98
— USS720CI.DLL	// ISD USB Smart Cable PnP Class Installer
— USS720IN.DLL	// ISD USB Smart Cable PnP Printer Port Monitor Installer
— USS720MN.DLL	// Release version of ISD USB Printer Port Monitor
■ \Win98\Debug
— USS720.INF	// Debug version of USS720.INF for Windows 98
— USS720.SYS	// Debug version of USS720.SYS for Windows 98
— USS720CI.DLL	// Debug version of ISD USB Smart Cable PnP Class Installer
— USS720IN.DLL	// Debug version of USS720IN.DLL for Windows 98
— USS720IO.H	// Include file required when developing an interface to the USS-720
	device driver
— USS720MN.DLL	// Debug version of ISD USB Printer Port Monitor
■ \SAMPLES
— MakeFile	// MakeFile file required for building
— test.c	// Sample source
— test.exe	// Executable version of sample source
— test.rc	// Resource file required for building
— Sources	// Source file required for building

Hardware Requirements

In addition to the hardware included in the USS-720 Evaluation Kit, the following hardware is required in order to use the kit:

■Personal computer with 486 (or higher) processor with:

—16 Mbytes of RAM.

—USB connector.

And one of the two following operating systems:

—Windows 98 or

—Windows 95 version 4.00.950b with the USB supplement (QFE 1214), also known as OSR2.1.

Note: No upgrade path is available from previous versions of Windows 95 version 4.00.950 to OSR2.1; Windows 95 version 4.00.950B (OSR2.0) must first be installed, and then the system can be upgraded to OSR2.1.

■Printer or other peripheral device conforming to IEEE Standard 1284.

Lucent Technologies Inc. 1-7