Reference Manual R FR 5010 Version1.4
Rear Termination Panel
The R FR 5010/ R FR 5011 has an integral termination panel on the rear of the rack for the connection of power and various other connections for expansion and interfacing. Figure 5
Figure 5 Rear Panel Connections
Rack Connections
Power Connection
There are two power connections provided for the rack. One is for primary power and the other for the optional redundant power supply. Input power range is 100 to 240VAC 50 to 60Hz. Connection is made using an IEC power cable. For systems without redundant power connection is made to AC1 in only. The power fuse is in the connector assembly (Figure 5) and removal of this small module will enable fuse exchange. Please ensure you use the correct fuse rating. (2A).
Page 16
