Reference Manual R FR 5010 Version1.4
WARNING
Electrical supplies in excess of 50 (fifty) volts peak value are potentially hazardous or lethal. AC supplies between 100 and 250 peak volts exist within the rack frame chassis when connected to AC power.
Only qualified personnel should service the rack frame assembly.
Removal of technical earth may render the equipment dangerous and intentional removal is prohibited.
This unit has to be separated from mains by disconnecting the power supply cords.
This unit may have two power supplies and two power supply cords. Disconnect all power supply cords before servicing to avoid electric shock.
DOUBLE POLE / NEUTRALE FUSING
After operation of the fuse, parts of equipment that remain energized might represent a hazard during servicing.
For continued protection against risk of fire, replace only with same type and rating of fuse.
F1 .. F4: T2AH250V
Replacement AC fuses must be of the specified type and rating: F1 .. F4: T2AH250V
The use of repaired fuses or shorting links is to be avoided.
WARNING! CAUTION!
Page 3
