Reference Manual R FR 5010 Version1.4
Page 31
!
!
Electrical power is connected to the R FR 5010 /
R FR 5011 chassis via the two IEC power connectors
located on the termination panel on the rear of the
rack. There is no power switch provided. Two
separate and isolated power connections are
available, one for the primary power and one for
the optional redundant power supply. Primary
power is connected to AC in 1
Caution
Please remove power before attempting
to exchange a power fuse. Only replace
the fuse with a correctly rated
replacement. For safety DO NOT
physically disconnect or isolate the rack
from earth for any reason.
Caution
Service to be performed by qualified
personnel only