Reference Manual R FR 5010 Version1.4
Page 32
The rack frame chassis R FR 5010 / R FR 5011 is intended for
operation in broadcast environments.
The operation in excessive dust and moisture or extreme
temperature requires special provisions like
• dust filters
• air conditioning
• avoidance of condensed water.
Caution!
The power cords must meet the safety requirements of the
country where the rack frame is used and has to be
approved in this country, e.g.
• CE-Mark in Europe
• UL-listed in USA
• CSA certified in Canada
CAUTION!
The power supply cords are used to disconnect the R FR
5010 / R FR 5011 from the mains supplies, make sure that
the socket-outlets are located/installed near the
equipment and are easily accessible.
CAUTION!
The rack frame chassis is a CLASS I EQUIPMENT, ensure
before initial operation that protective earth is connected
to the building wiring and zero potential is established.
The functional earth connection at the rear termination
panel is connected internally to protective earth. If
necessary, it may be used for potential equalization to
other units.