Reference Manual R FR 5010 Version1.4
5 1
6 9
Figure 8. Control Connector
LAN Connection
This is a standard RJ48 connection and is used to provide standard TCP/IP network control connectivity into a control system. To be operational this port requires the R CT 5030 Master Controller is fitted to the rack. Please see the reference manual for the R CT 5030 for more details on the use of this connection
External Sync Connection
An external sync reference (loop through connection) can be connected for the rack. This provides a common genlock reference for the modules installed in the chassis. Sync signal can be black or composite analog sync NTSC or PAL. This is to provide a common reference to all modules installed in the rack and can simplify the distribution of the reference signal in some system applications.
Page 21
