30 User Guide | Oxygen 88 |
Programming a Button to Increment/Decrement a Program Change
It is possible to configure a button to send an Increment (increase) or Decrement (decrease) Program Change message each time it is pressed.
To configure a button to increment a Program Change between a minimum and maximum value, assign the button to number 156 (see "Assignable MIDI CCs" on page 41). The minimum and maximum values are set using the Data 2 and Data 3 parameters respectively.
The requires three values to be specified (values given are examples):
|
| Key | Parameter | Value |
|
|
| ||
Control Assign | Program Increment | 156 | ||
|
|
|
|
|
Data | 2 | (example) | Program Number (minimum) | 0 |
|
|
|
|
|
Data | 3 | (example) | Program Number (maximum) | 127 |
|
|
|
|
|
The following example configures a button to increment through the sound patches on a connected software or hardware synthesizer:
1.Select the Control as described earlier in this guide (Button or Pedal).
2.Press the Advanced button.
3.Press the Control Assign key.
4.Enter 156 using the number keys. This configures the button to increment the Program number.
5.Press the Enter key.
6.Press the Advanced button.
7.Press the Data 2 key.
8.Enter 0 using the number keys. This specifies the lowest Program number.
9.Press the Enter key.
10.Press the Advanced button.
11.Press the Data 3 key.
12.Enter 127 using the number keys. This specifies the highest Program number.
13.Press the Enter key.
To configure a button to decrement a Program Change between a maximum and minimum value, assign the button to number 155 (see "Assignable MIDI CCs" on page 41). The minimum and maximum values are set using the Data 2 and Data 3 parameters respectively.
NOTE: Each button will only increment or decrement its own parameter value and this value is independent of any other button. In other words, assigning one button to increment through sound patches and another button to decrement through sound patches will cause the first button to recall programs 1, 2, 3, etc., each time the button is pressed. Pressing the second button will recall programs such as 127, 126, 125 (as opposed to starting to decrement where the first button left of; for example 2, 1, 0).
