12 User Guide | Oxygen 88 |
7: Advanced Keyboard Functions
Oxygen 88 includes extended programming capabilities through secondary functions of the keys. The available parameters are listed along the top edge of the keyboard, and accessed by pressing the Advanced button. The LED screen shows the numerical value of the parameter being edited.
Cancel
C1
Ctrl Sel
Ctrl Asgn
Chan Asgn
Global Chan
Data 1 | Data 2 |
|
|
Data 3
C2
Prog |
| Bank LSB | Bank MSB |
| |||
|
|
|
|
Panic | Vel Curve | Draw Bar | Mem Dump |
|
|
| C3 |
Dev ID
Store
Zone Voice
Zone Prg
Zone LSB |
|
|
| Zone MSB |
|
| |||
|
|
|
|
|
Zone Range
C4
Zone Chan
Zone Cut | Zone Tran |
|
|
C0 | C1 | C2 | C3 | C4 | C5 | C6 | C7 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Enter |
|
|
| C6 |
|
|
|
|
|
| C7 |
Cancel
Pressing the Cancel key will exit advanced mode, discarding all changes. Alternatively, pressing the Advanced button a second time will yield the same result.
NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect and cannot be cancelled once the corresponding key has been pressed.
Control Select
The Control Select function (CTRL SEL) is used to select a MIDI control (a Knob, Button, Slider or the Sustain or Expression Pedal jack) for editing.
NOTE: Every control is labeled with a unique number, such as C1, C2, etc. It is not necessary (or possible) to enter the letter C when following the editing examples below.
1.Press the Advanced button.
2.Press the Control Select key.
3.Enter the control's ID number using the number keys.
4.Press the Enter key to confirm.
Or:
Move or press the control to be programmed, before or after pressing the Advanced button.
