M-Systems Flash Disk Pioneers 45-SR-001-01-7L user manual LED Indicators and Configuration Switch

FFD 3.5" SCSI Flash Disk User Manual

7 LED Indicators and Configuration Switch

Figure 4 illustrates the two LEDs located on the FFD front panel. Table 6 Describes the LED color codes and status definitions.

Figure 4: Front Panel LED Indicators

Table 6: LED Status Description

Status	LED Color Indicator	Description
POWER	Green	Indicates that power is applied to the disk. The LED
		remains ON if everything is okay, and flashes at a rate
		of 1 Hz to indicate that the power-up and built-in self
		test have failed and that the disk is malfunctioning.
BUSY	Red	Indicates that the FFD is being accessed. The LED is lit
		when the disk is accessed (read/write/format) and
		remains lit until the access is completed.

45-SR-001-01-7L REV 4.0 14 of 22