FFD 3.5" SCSI Flash Disk User Manual
In order to proceed with the installation, you must have Supervisor privileges on your UNIX system. If you do not have these privileges, contact your system administrator.
To install the FFD as a drive under UNIX:
1.Run the UNIX format utility and follow the displayed instructions.
2.Select the FFD from the list of drives.
3.Define a new drive and manually enter the drive parameters using the type option. Refer to Table 5 for a list of the appropriate drive parameters.
4.Define the partitions according to your system requirements.
5.Run the format and analyze command.
6.Use the label command to partition and initialize the drive.
7.Exit the format routine.
8.Build the file system on the FFD, using the UNIX makefs utility.
9.Mount the drive and place the appropriate link commands in your startup script.
11 of 22 |
