Mackie Digital Mixers Using the Auto-Tune Plug-in, Front Panel Overview

You can think of Auto-Tune as being broken into three sections.

1.Global Controls

2.Auto-Tune Controls

3.Vibrato Controls

Global Controls

Auto-Tune Controls

Vibrato Controls

10	Antares Auto-Tune

Contents

Antares Advanced Tuning Effects Iconography Introduction Let’s Get Started FX Routing More about Scales Introduction About Antares About the D8B UFX Card About Auto-Tune Let’s Get Started Requirements Authorizing the Plug-in Unlock Procedure Configuring the Plug-in Assign the Auto-Tune Plug-into a UFX card Assign an Input Source to the Plug-in Removing the Plug-in Using the Auto-Tune Plug-in Front Panel Overview Global Controls Memory A/B Bypass Auto-TuneControls Scale Editor Scale Done Why Remove Key Selection Pitch Controller Scale Detune Retune Speed Tracking Change Meter Vibrato Controls Saving, Loading, and Resetting a Preset To Save a Preset: To Load a Preset: To Reset the Plug-in: To Cut Preset Settings: To Copy Preset Settings: To Paste Preset Settings: Automation and Snapshot Control Dynamic Real Time To write automation on a loaded plug-in: Dynamic Off-line To write a snapshot on a loaded plug-in: FX Routing The Plug-inConfiguration Window Inserting a Plug-ininto a Channel Using an Aux Send with a Plug-in Send the Input Signal to the Aux Bus Pre-Faderand Post-FaderAuxiliary Sends The FX Return Channel More About Scales Historical Tunings Ethnic Tunings Contemporary Tunings 24 Tone: 31 Tone: 53 Tone: Partch: Carlos Alpha: Complimentary Doodle Page