Mackie Digital Mixers Using an Aux Send with a Plug-in, Send the Input Signal to the Aux Bus, Aux, AUX, AUX

Using an Aux Send with a Plug-in

♦Click the associated INPUT menu button and select an

Aux input source. In the example below, we have chosen the Aux 5 Bus.

Send the Input Signal to the Aux Bus

1. Send a signal to a D8B mixer input channel (MIC/LINE or TAPE IN).

2.Assign the input channel V-Pot/GUI Control Pot to an aux send. We have chosen AUX 5 according to the example above.

3.Use the AUX 5 control to

adjust the input level to the plug-in.

Remember to select an aux send before using the V-pot or GUI Control Pot on the mixer input channel (MIC/LINE or TAPE IN).

GUI Control Pot Assigned to AUX 5

User’s Guide 25