Global Controls

Input Select Display &

Meter Displays

Hide Plug-In

Drop-down Menu

(In/Out)

Window Button

Preset Display/

Preset Select

Memory A/B

Menu

Bypass

Select

 

Buttons

Button

Button

Input Select

Assign Auto-Tune’s input from any of the DB8’s pre, post, or auxiliary channels.

Input and Output Meters

The input meter represents the incoming signal from the D8B, with a range from –50 dB to 0 dB. The output meter is located just beneath the input meter.

Menu Button

The drop-down menu button will enable familiar functions such as undo, redo, load, save, reset, cut, copy and paste. See page 19 for more details.

Hide Button

The small button located at the top right of the GUI will hide the Auto-Tune window.

Preset Selection and Display

Toggle the up/down arrows to select from an array of factory presets or your own saved user presets.

Note: The Input Source can be set from either the plug-in GUI or the plug-in configuration Window.

 

 

User’s Guide

11