Mackie Digital Mixers Iconography, Part No. 820-252-00Rev. A 03/2001

Iconography

This icon identifies a description of how to perform an action with the mouse.

This icon identifies a description of how to perform an action from the console.

This icon will lead you to some further explanations of features and practical tips.

This icon marks information which is very important, so please make sure you have a read.

“Mackie” and the “Running Man” figure are trademarks or registered trademarks of Mackie Designs Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

Part No. 820-252-00 Rev. A 03/2001

2	Antares Auto-Tune

Contents

Antares Advanced Tuning Effects Iconography Introduction Let’s Get Started FX Routing More about Scales Introduction About Antares About the D8B UFX Card About Auto-Tune Let’s Get Started Requirements Authorizing the Plug-in Unlock Procedure Configuring the Plug-in Assign the Auto-Tune Plug-into a UFX card Assign an Input Source to the Plug-in Removing the Plug-in Using the Auto-Tune Plug-in Front Panel Overview Global Controls Memory A/B Bypass Auto-TuneControls Scale Editor Scale Done Why Remove Key Selection Pitch Controller Scale Detune Retune Speed Tracking Change Meter Vibrato Controls Saving, Loading, and Resetting a Preset To Save a Preset: To Load a Preset: To Reset the Plug-in: To Cut Preset Settings: To Copy Preset Settings: To Paste Preset Settings: Automation and Snapshot Control Dynamic Real Time To write automation on a loaded plug-in: Dynamic Off-line To write a snapshot on a loaded plug-in: FX Routing The Plug-inConfiguration Window Inserting a Plug-ininto a Channel Using an Aux Send with a Plug-in Send the Input Signal to the Aux Bus Pre-Faderand Post-FaderAuxiliary Sends The FX Return Channel More About Scales Historical Tunings Ethnic Tunings Contemporary Tunings 24 Tone: 31 Tone: 53 Tone: Partch: Carlos Alpha: Complimentary Doodle Page