Mackie Digital Mixers FX Routing, The Plug-inConfiguration Window

	Input Source As-	Plug-in Assign-
Card Slot Column signment Column		ment Column
Plug-in		Close Window
Plug-in
display toggle		Stereo/Mono
Input Channel		Stereo/Mono
Input Channel		Mode Column
Assignment Drop-		Stereo/Mono
down Menu Button		Stereo/Mono
Card A		Toggle Button
Card A
Card B
Card B
Card C
Card C
Card D (no
card installed)

Contents

Antares Advanced Tuning Effects Iconography Introduction Let’s Get Started FX Routing More about Scales Introduction About Antares About the D8B UFX Card About Auto-Tune Let’s Get Started Requirements Authorizing the Plug-in Unlock Procedure Configuring the Plug-in Assign the Auto-Tune Plug-into a UFX card Assign an Input Source to the Plug-in Removing the Plug-in Using the Auto-Tune Plug-in Front Panel Overview Global Controls Memory A/B Bypass Auto-TuneControls Scale Editor Scale Done Why Remove Key Selection Pitch Controller Scale Detune Retune Speed Tracking Change Meter Vibrato Controls Saving, Loading, and Resetting a Preset To Save a Preset: To Load a Preset: To Reset the Plug-in: To Cut Preset Settings: To Copy Preset Settings: To Paste Preset Settings: Automation and Snapshot Control Dynamic Real Time To write automation on a loaded plug-in: Dynamic Off-line To write a snapshot on a loaded plug-in: FX Routing The Plug-inConfiguration Window Inserting a Plug-ininto a Channel Using an Aux Send with a Plug-in Send the Input Signal to the Aux Bus Pre-Faderand Post-FaderAuxiliary Sends The FX Return Channel More About Scales Historical Tunings Ethnic Tunings Contemporary Tunings 24 Tone: 31 Tone: 53 Tone: Partch: Carlos Alpha: Complimentary Doodle Page