24/96
To purge a Project:
1. Press Project. Press the Page Right button, and
in the Project Files Menu, select Purge.
PROJECT
SDR
2. The Purge current project? screen appears. Select OK to delete files not referenced in the project file, or Cancel to exit.
3. The PURGE: clear history? |
| |
PURGE: clear history? | ||
screen appears. Select Yes to | ||
Yes No Cancel | ||
clear the history list, No to leave | ||
the history list intact and retain |
|
files that are referenced in the history list, and Cancel to exit without purging.
4.Purging project... appears in the display, followed by Project purged to confirm that the project was successfully purged.
Basic Transport Operations
The SDR24/96 transport and recording controls are similar to those on most multitrack tape recorders.
REWIND | FAST FWD | STOP | PLAY | RECORD |
Fast Wind
REWIND and FAST FWD puts the SDR24/96 into fast wind mode from any state. Fast Wind also punches out of record and cancels master record standby. If there are unsaved recording passes, the recording passes and project file are automatically saved to disk.
When pressed from stop, the “tape” rolls slowly at first, then accelerates to 20X speed in four seconds. Pressing the button a second, third, fourth, or fifth time increases the winding speed still further.
♦1 press: Slow wind; 20X speed after four seconds
♦2 presses: 60X speed
♦3 presses: 180X speed
♦4 presses: 540X speed
♦5 presses: 1620X speed
Stop
STOP brings the “tape” to an immediate halt. STOP also punches out of record and cancels master record standby. If there are unsaved recording passes, the recording passes and project file are automatically saved to disk.
When the transport is already stopped, pressing STOP twice within one second moves the current locator to the beginning of the project.
26 | SDR 24/96 |
|