SDR 24/96

To turn on the relative mode:

1.Press SETUP to enter the

SETUP MENU.

SETUP

2.Select Transp. to enter the TRANSPORT OPTIONS menu.

3.Press the Page Right button and select RelMd. Use the << / >> buttons to select On or Off, then select OK to change the relative mode.

AutoPlay

SETUPMENU> Record I/O SyncTransp

TRANSPORTOPTIONS> Loc1 Loc2 Loc3 Loc4

<TRANSPORTOPTIONS> CurLocTrOfRelOfRelMd

RELATIVEMODE:On

<<>>OK

When AutoPlay is on, the transport automatically starts playing when you jump to a locate point.

To turn on autoplay:

 

1. Press SETUP to enter the

 

SETUP MENU.

SETUP

 

2.Select Transp. to enter the TRANSPORT OPTIONS menu.

3.Press the Page Right button twice and select AuPlay. Use the << / >> buttons to select On or Off, then select OK to change the autoplay mode.

Locate Points and Looping

SETUPMENU> Record I/O SyncTransp

TRANSPORTOPTIONS> Loc1 Loc2 Loc3 Loc4

<TRANSPORTOPTIONS AuPlayAUTOPLAY:On

<<>>OK

Locate points provide fast access to frequently used locations in your Project. Looping allows you to playback or record a section of the project repeatedly, from a preset starting time to a preset ending time.

Locate

The SDR24/96 has four numbered Locates. The numbered Locates can be set either from the front panel or an optional remote. Storing a Locate point saves the Current Time (Transport position) to the selected Locate. Recalling a Locate causes the Transport to jump to the stored time.

To recall a Locate point:

1.

Press LOCATE. The Locate LED lights.

 

LOCATE

 

2.

JUMP TO LOCATOR appears in

JUMP TO LOCATOR:

 

the display. Select one of the four

 

Locate points in the display

 

Loc1 Loc2 Loc3 Loc4

(Loc1, Loc2, Loc3, Loc4). The

transport automatically jumps to the selected Locate point (and the Locate LED goes out).

30

SDR 24/96