Digital Headphone Operation

1. Turn On the Headphones:

To turn on the headphones, press the ”PWR” button on the right side ear pad. The digital display will show radio station digits when the headphone is on.

2.Tuning an FM Radio Station:

A.Press the ”UP” or ”DOWN” button to manually tune in an FM radio station.

B.Press and hold the ”UP” or ”DOWN” button for one second then release. The radio tuner will search up or down the radio band for the next strongest FM radio station.

Note: FM radio stations are always received in Stereo Mode.

C.Adjust the volume knob to the desired volume level.

Volume Control

3.Listening to What Is Displayed on the Viewing Screen: On the right ear pad are 3 pre-programmed buttons marked 1, 2 and 3. These buttons will tune the headphone radio to the exact MovieVision signals. Press the buttons one at a time until what you hear in the headphones is what is displayed on the viewing screen.

4.Turn Off the Headphones when you are Finished:

A.Press the ”PWR” button to turn off the headphones.The display will be blank when the headphones are off.

B.The batteries supplied with your MovieVision headphones will last for approximately 10 hours of continuous use. Forgetting to turn off the headphones when they are not in use will decrease the battery life.

5. Connecting a Second Set of Headphones

Your MovievisionTM headphones have a plug receptacle locat- ed at the side of the “L” ear pad. A second set of personal type headphones (Must have 3.5 mini male type plug) can be connected at this point.

Note: When a second pair of headphones are attached, the tuning and audio level is controlled by the MovievisionTM headphone.

Plug for second pair of headphones

17

Page 17
Image 17
Magnadyne MV-VCRUSER02 owner manual Digital Headphone Operation, Turn On the Headphones, Tuning an FM Radio Station