Magnavox 50ML8105D/17 Channel Setup Menu, Channel Search, and press, to start scanning, English

Using the OSD menus

Channel Setup Menu

The channel setup menu helps you to configure and set up chan- nels.You can set the tuner for sig- nals from the antenna or a cable receiver, search for channels, and edit the favorite channels

Main Menu

Picture	Tuner Mode	Antenna	Cable
Sound	Channel Search		Press	right
Size	Manual Search		30
PIP/PBP	Favorite Channel	Edit	Press	right
Parental Control	Reset Channel
	Back
Channel Setup
Setup
Exit

English

.

Component	Function	Range / Options
Tuner Mode	Specifies antenna or cable input for the	Antenna, Cable
	Analog signal.
	Specifies antenna input for the Digital signal.
Channel Search	Scans for channels automatically. See	–
	“Channel Search” below.
Manual Search	Enables you to manually search for chan-	2 ~ 69
	nels.†
Favorite Channel	Edits the favorite channel list. See “Favorite	–
	Channel List” on page 28.
Reset Channel	Clears all channels that were added to the	–
	channel list using the Channel Search fea-
	ture. After using this function, use Channel
	Search to rescan for channels.†

† This selection is only available when the input signal is digital.

Channel Search

Use this option to start scanning for channels automatically as follows:

1.Select the Channel Search item from the channel setup menu

and press	to start scanning	Auto Scanning	Auto Scanning
for channels automatically.		Antenna	Cable
Scanning begins.		RF Channel: 11	RF Channel: 11
2. Press OK at any time to stop		Major Number: 2	RF Channel: 11
scanning.
		Digital signal auto scan OSD	Analog signal auto scan OSD

27