Magnavox MDR513H / F7 owner manual Connecting to a TV with an Hdmi Compatible Port

CONNECTION

Connecting to a TV with an HDMI Compatible Port

•HDMI outputs the video / audio signals without converting to analog signals.

•No audio connection is required.

				HDMI cable	HDMI IN
				HDMI OUT
				rear of this unit
	VIDEO VIDEO		Y
IN		IN OUT
	L	L
OUT
	R	IN R	OUT	COAXIAL
ANTENNA	AUDIO IN	S-VIDEO AUDIO OUT	S-VIDEO
	(L1)
					ANT. IN
					This connection is for
					TV loop through only
					IN
Do not tilt the connector when inserting it into the HDMI jack, and make sure the
shapes of the jack and the connector are matched.					OUT	or
				RF coaxial	RF coaxial
				cable	cable

ANTENNA

VHF / UHF antenna

cable TV company

Supplied cables used in this connection are as follows:

• RF coaxial cable x 1

Please purchase the rest of the necessary cables at your local store.

HDMI Mode and Actual Output Signals

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.

Front Panel Display Video Output Signal

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

Copyright protection system

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information.

*HDMI: High Definition Multimedia Interface

• The HDMI mode that is not supported by display device will be skipped.

Note

•Some devices with an HDMI input may not operate properly with this unit.

•When using an HDCP-incompatible display device, the image will not be viewed properly.

•Among the devices that support HDMI, some devices can control other devices via the HDMI connector; this unit can be controlled by another device via the HDMI connector.

•The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected.

•Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output connector.

•When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable, the signals are output in digital RGB.

•When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur. Please check and set the HDMI setting again.

18 EN