Magnavox MDR513H / F7 When you finish with the setting, press Setup to exit, Format Default RGB

Playback

Display

Video Recording Clock Channel

HDMI Reset All

SETUPS

HDMI

OPEN/

STANDBY-ON DTV/TV SOURCE CLOSE

.@/:	ABC	DEF
GHI	JKL	MNO	CHANNEL

PQRS TUV WXYZ

SPACE CLEAR

SETUP AUDIO REPEAT HDMI

DISC MENU TITLE

OK

DISPLAYRETURN

V.REPLAY	V.SKIP
RAPID PLAY
D.DUBBING	HDD	DVD
TIMER	REC MODE	REC

1Press [SETUP] in stop mode and use [K/ L] to select “General Setting”, then press [OK].

2Use [K/ L] to select “HDMI”, then press [OK].

•You cannot select HDMI when an HDMI cable is not connected and the items are shown in grey color.

Use [K/ L] to select a desired item, then press [OK].

3	1
		Format
	2	HDMI Audio
	3	RGB Range
	4	HDMI Control

4When you finish with the setting, press [SETUP] to exit.

1 Format (Default : RGB)

You can select the color space for HDMI output.

Set the appropriate color space for your display device.

Use [K/ L] to select a setting, then press [OK].

•When the connected device is not compatible with the Y/ Cb/Cr, HDMI signal is output as RGB regardless of the setting.

Format

RGB

YCbCr

Your setting will be activated.

2 HDMI Audio (Default : ON)

If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUTPUT jack to your audio system, etc.), you can set the HDMI audio output off.

Use [K/ L] to select a setting, then press [OK].

• Set to “OFF” when the HDMI sound is not output.

HDMI Audio

ON

OFF

Your setting will be activated.

3 RGB Range (Default : Normal)

You can adjust the RGB range to make the dark areas of the HDMI images brighter.

Use [K/ L] to select a setting, then press [OK].

•Select “Enhanced“ if the black-white contrast is not clear.

•This setting is effective only for HDMI RGB output.

RGB Range

Normal

Enhanced

Your setting will be activated.

4 HDMI Control (Default : OFF)

HDMI Control

ON

OFF

HDMI control allows integrated system control over HDMI and is part of the HDMI standard.

When “HDMI Control” setting is set to “ON”, functions listed below will be available.

One Touch Play

When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically, when you press [PLAY B], [G], [H,], [DISC MENU], [TIMER], [DTV/TV], [SETUP], [CHANNEL/ ], [the Number buttons] or [D. DUBBING] when the unit’s power is on.

Standby

When you press and hold [STANDBY-ONy] for 2 seconds, it turns off the power to the standby mode of the TV first and then turns the power of this unit also.

System Information

Get & Set Menu Language

This unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit.

112 EN