MFX450_eng 11/26/02 3:21 AM Page 15
Receiver adjustment
Once the number and position of loudspeakers has been fixed, you can adjust the initial receiver settings for optimum surround sound with the actual setup:
1Set which speakers have been connected to the receiver (see “Menus / SPEAKR SETUP”).
Note: The initial setting of your receiver is: two front speakers left and right: present (cannot be altered)
center speaker: present
two rear speakers: present
subwoofer: present
2Select the size of the speakers (SMALL or LARGE) (see “Menus / SPEAKR SIZES”).
Select SMALL if your speaker is able to reproduce low notes down to at least
Select LARGE if your speaker is able to reproduce low notes down to at least 50 Hz.
(As a rule of thumb, a LARGE speaker has a cone diameter of at least 12 cms (5 inches).)
See the specification sheets of your loudspeakers.
Note: The initial setting of your receiver is: all speakers: SMALL
3Set the distance from the speakers to the listener’s position (see “Menus / SPK DISTANCE”).
Note: The initial setting of your receiver is:
front speakers, left and right: 13 feet (4 meters)
center speaker: 10 feet (3 meters)
rear speakers, left and right: 7 feet (2 meters)
SYSTEM SETUP
English
15
