13. MAINTENANCE
ɶServicing
•Please refer to relevant topics on “TROUBLESHOOTING” on page 25 before returning the product.
•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no
ɶCleaning the Cabinet
•Wipe exterior surfaces of the unit with a soft cloth.
•Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.
ɶIR Signal Check
•If the remote control is not working properly, you can use a digital camera (including a cellular phone with built- in camera) to see if it is sending out an infrared signal. See next.
With a digital camera (including
Point a digital camera towards the remote control. Push any button on the remote control and look through the digital camera. If the infrared light appears through the camera, the remote control is working.
Or
To check remote operation, aim the remote at the unit then press any arrow button. The Standby/on Indicator on the unit will turn Off when the button is pressed and turn On again when the button is released. This
confirms that the unit is receiving the IR remote signal.
14. SUPPLIED ACCESSORIES
•AC adapter
•Remote Control (NB930UD)
•Batteries (AAA, 1.5 V × 2)
•Audio / video cables
•SETUP MANUAL
•Wall mount bracket
•Wall mount screws
•VUDU sheet
CCaution
•Do not use adapters other than the supplied AC adapter for this unit.
•Do not use the supplied AC adapter with any other device.
We are not responsible for any damages or injury caused by your misuse described above.
EN
