BEFORE YOU START

Finding the Viewing Channel on Your TV

After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.

1 After you have made all the necessary connections, press [STANDBY/ON y] to turn on the unit.

2 Turn on your TV.

• If connected to your VCR make sure it is switched off or in standby mode before proceeding.

3 Press “2” on the TV’s remote control, then press channel down button repeatedly until you see “Initial Setup” menu.

Initial Setup

Language

English

Français

Español

Select the language for Setup display.

This is the correct viewing channel (external input channel) for the recorder.

• For some TVs, there may be a button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV”, or “SELECT”. In such case, press it repeatedly. Refer to your TV’s user manual for details.

• If more than 10 minutes have passed since you have turned on the unit, you may see the MAGNAVOX screen saver instead of “Initial Setup” menu.

MAGNAVOX screen saver:

4 Proceed to step 2 in “INITIAL

SETTING” on page 22.

Note

• Video input selection varies for different brand’s models of TVs.

• Consult your TV manufacturer if none of the above is successful.

18 EN

Page 18
Image 18
Magnavox ZC320MW8B/F7 owner manual Before YOU Start, Finding the Viewing Channel on Your TV, Turn on your TV