Magnavox ZC320MW8B/F7 Settings for AN External Device, Recording from an External Device

This operation may take a

while to be completed.

It may take a while to load the disc

data after the disc tray closes.

SETTINGS FOR AN EXTERNAL DEVICE

Recording from an External Device

Before recording from an external device, refer to the instructions for the connection on page 36.

1 Turn on the TV and press [STANDBY/ON ], and be sure to select the input of the TV to which the unit is connected.

2 Press [OPEN/CLOSE A] to open the disc tray. Place the disc to record properly.

3 Press [OPEN/CLOSE A] to close the disc tray.

4 Select the appropriate external input

channel (L1 or L2) by pressing [SOURCE].

• If the external device is connected to the rear of this unit, select L1.

• If the external device is connected to the front of this unit, select L2.

• You can also select L1 or L2 channel by using [the Number buttons].

e.g.) For L1, press [0], [0], [1].

5 Press [REC MODE] repeatedly to

select a recording mode.

Refer to “Recording Mode” on page 24.

HQ	SP	SPP	LP	EP	SLP
(1Hr)	(2Hr)	(2.5Hr)	(3Hr)	(4Hr)	(6Hr)

6 Press [IRECORD] on the unit to start recording.

7 Start playback on the external device

2 3 6 8 1to record from.

8 Press [CSTOP] on the unit to stop recording.

Introduction Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 37