BEFORE RECORDING

Make Recording Compatible

Setting for Auto Chapter

Introduction

Use this feature to make unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style.

1)Press [MENU] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2)Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear.

3)Use [K / L] to select “Make Recording Compatible”, then press [OK].

4)Use [K / L] to select “ON” or “OFF”, then press [OK].

Make Recording Compatible

ON

OFF

ON: Title list will be replaced when you make additional recordings to the discs recorded by other units.

OFF: Prohibiting additional record to the disc that

has a title list created by other units.

5) Press [MENU] to exit.

You can set a specified time for chapter marks.

1)Press [MENU] and use [K / L] to select “General Setting”, then press [OK].

“General Setting” menu will appear.

2)Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear.

3)Use [K / L] to select “Auto Chapter”, then press [OK].

4)Use [K / L] to select a desired time option, then press [OK].

Auto Chapter

OFF

5 minutes

10 minutes

15 minutes

30 minutes

60 minutes

5) Press [MENU] to exit.

Note

The interval for auto chapter may be up to two minutes different from the time option you set.

A blank chapter may be created depending on the remaining time of the disc.

Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 25

Page 25
Image 25
Magnavox ZC320MW8B/F7 Before Recording, Make Recording Compatible, Setting for Auto Chapter, Press Menu to exit