Magnavox ZC320MW8B/F7 owner manual Hints for audio CD tracks and MP3 files, Sampling frequency

File List

DISC NAME

Folder 1

Folder 2

MP3 file 1

MP3 file 2

MP3 file 3

MP3 file 4

MP3 file 5

MP3 file 6

1/ 2

When selecting track/file: Playback will start.

When selecting the folder (Not available for audio CD): The files in the folder will appear.

Use [K / L] to select the file or folder you want to play back, then press [OK].

• Press [PLAY B], [OK] or [B] to move to any lower hierarchies.

Use [K / L] to select a desired folder or track/file, then press [OK].

e.g.) File list

3

BASIC PLAYBACK

Playing Back an Audio CD and a CD-RW /-R with MP3 Files

1 Follow steps 1 to 2 in “Direct Playback” on page 43.

2 Press [OPEN/CLOSE A] to close the

disc tray.

It may take a while to load the disc data after the disc tray closes.

When an audio CD is inserted, track list will appear.

When a CD-RW/-R with MP3 files is inserted, file list will appear.

• To exit the track/file list, press [STOP C].

• To resume the track/file list, press [TITLE].

Note

•The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck.

•Files whose extension is other than “.mp3(MP3)” will not be listed.

•Some unplayable folders or files may be listed due to the recording status.

46 EN

•Press [s] or [RETURN] to move back to the previous hierarchy.

Hints for audio CD tracks and MP3 files:

•Folders are shown by .

•Audio CD tracks are shown by .

•MP3 files are shown by .

•The system can recognize up to 255 folders, up to 99 tracks/999 files.

•Letters of a file/folder name overflowing the given space will be displayed as “...”. Unrecognizable characters will be replaced with asterisks.

•If there are no files in the folder, “No Files” will be displayed.

It is recommended that files to be played back in this unit are recorded under the following specifications:

<MP3>
• Sampling frequency	: 44.1 kHz or 48 kHz.
• Constant bit rate	: 112 kbps - 320 kbps