Magnavox ZC320MW8B/F7 owner manual Playback cont’d

SETUPS

Playback (cont’d)

C Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [OK].

If “Other” is selected for 3 using [the Number buttons].

to 5 , press 4-digit code

Dolby Digital

PCM

Stream

Your setting will be activated.

PCM	: Converts the Dolby Digital into PCM (2 channel).
	When your amplifier/decoder is NOT
	compatible with Dolby Digital, set to “PCM”.
Stream	: Outputs Dolby Digital signals
	When your amplifier/decoder is compatible
	with Dolby Digital, set to “Stream”.

3 Disc Menu Language (Default : English)

Set the language for disc menu.

Use [K / L] to select a setting, then press [OK].

Disc Menu Language

English

French

Spanish

Other

Your setting will be activated.

4 Audio Language (Default : Original)

Set the audio language.

Use [K / L] to select a setting, then press [OK].

Audio Language

Original

English

French

Spanish

Other

Your setting will be activated.

•When “Original” is selected, the audio language will be in the disc’s default language.

5 Subtitle Language (Default : OFF)

Set the subtitle language.

Use [K / L] to select a setting, then press [OK].

Subtitle Language

OFF

English

French

Spanish

Other

Your setting will be activated.

Code Input

- - - -

•When you finish entering the code, press [OK]. Refer to the language code table on page 80.

Note

•Only the languages supported by the disc can be selected.

•Audio language setting may not be available to some discs.

•You can change or switch off the subtitles on a DVD also from the disc menu if it is available.

•Press [CLEAR] or [s] to erase numbers entered incorrectly.

6 Angle Icon (Default : ON)

Set to “ON” to show the angle icon during the playback.

Use [K / L] to select a setting, then press [OK].

Angle Icon

ON

OFF

Your setting will be activated.

7 Still Mode (Default : Auto)

Select “Auto” usually.

Use [K / L] to select a setting, then press [OK].

Still Mode

Auto

Field

Frame

Your setting will be activated.

Auto	: Optimum resolution setting (“Field” or
	“Frame”) will be selected.
Field	: Images in the still mode will be stabilized.
Frame	: Images in the still mode will be highly defined.

Note

•Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video).

72 EN