Magnavox ZC320MW8B/F7 Troubleshooting, You press OPEN/CLOSE a, Repairing process MAY not work

PLAYBACK

RECORDING

OTHERS

TROUBLESHOOTING

	Symptom		Remedy
Discs recorded on this unit cannot			• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the
be played back on other DVD			disc after recording (page 39).
players.
The disc does not start playback			• Resume playback was activated (page 48). Press [STOP C] twice.
from the beginning.			• You have inserted a disc whose title menu or DVD menu automatically
			appears on the TV screen when it is first insert.
The unit starts playing back the disc			• The DVD-video features an auto playback function.
automatically.
Some functions such as stop,			• Depending on the disc, you may not be able to do some of the
search, or slow-motion playback			operations. Refer to the manual supplied with the disc.
cannot be performed.
The language for the sound track			• The title does not have the multilingual audio tracks.
cannot be changed.			• The DVD-video prohibits the changing of the language for the sound
			track.
The subtitle language cannot be			• Multilingual subtitle are not recorded on the DVD-video.
changed or turned off.
The angles cannot be changed.			• Multi-angles are not recorded on the DVD-video being played back.
			• The angle-change operation is whenever possible as long as the disc
			contains a multi-angle portion. Actual change will be performed when
			the portion has come up.
			• The DVD-video prohibits changing angles.
			• Try changing the angle using the DVD-video’s menu.
Nothing was recorded even though			• There was a power failure during recording.
you set the timer setting correctly.			• The unit’s internal clock stopped due to a power failure that lasted for
			more than 30 seconds. Reset the clock (page 23).
			• The program contains copy protection signals that restricts copying.
			• The timer setting overlapped with another setting that has priority.
Recording does not stop			• It may take a few seconds for the unit to input disc data before
immediately after you press			recording stops.
[STOP C].
Timer recording is not complete or			• The timer setting overlapped with another setting that has priority
did not start from the beginning.			(page 31).
			• Disc space was not enough.
The unit does not operate properly.			• When static electricity, etc., causes the unit to operate abnormally,
			unplug the unit and then plug it in again.
The disc tray does not open when			• It may take a few seconds for the disc tray to open after you have
you press [OPEN/CLOSE A].			recorded or edited a disc. This is because the unit is adding disc data to
			the disc.
“Repairing” appears on the TV			• If there is a power failure or unplugging during recording, finalizing,
screen.			formatting or editing (even after “Repairing” disappears), a repairing
			process will begin automatically just after turning the unit on again.
			It may take several minutes up to several hours.
	Repairing
			• If you intend to cancel the repairing process, press [AOPEN/CLOSE]
In a case you intend to cancel the
repairing process.			on the front panel, then select “Yes” and press [OK]. After that, press
			[OPEN/CLOSE A] to take out the disc. The disc canceled during the
	Do you want to cancel a repairing process ?		repairing process MAY NOT work.
	When selecting “Yes”, the disc may not be
	usable.
		Yes
		No
	Repairing

78 EN