Magnavox ZC320MW8B/F7 owner manual Timer Recording

TIMER RECORDING

You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available.

Before recording, make sure

•Connect the external tuner to either L1 or L2 and set it to output audio/video signals when it comes to the time you want to start recording.

•Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record

another at the same time.

•Set the clock before setting a timer programming.

•Insert a recordable disc with enough recordable space.

Guide to Timer Programming Display

3				1			2
		Timer Programming
	JAN/ 07/11 12:00 AM L1 SP
	SP (1:00)				THU JAN/06 11:00AM
		Date	Start		End	L1/L2
		JAN/07	12:00AM		1:00AM	L1
			New Program
						1/1

45

1Title of a timer program (Contains date, time, selected external input position, recording mode of the program)

2Current date and time

3Recording mode, and length of the recording

4Timer program list

5Total number of pages and current page (2 pages maximum)

1 Press [TIMER PROG.].

2	Use [K / L] to select “New Program”,
	then press [OK].
			Timer Programming
						THU JAN/06 11:00AM
			Date	Start End				L1/L2
				New Program
	•	If there are 6 or more programs,							use
		[H / G] to change pages.
3	Use [K / L] to enter the date, then
	press [B].
			Date	Start				End
			JAN/07	- - : - -				- - : - -
			L1/L2	Mode
			L1	SP
							SP	2h00m
			JAN/01
								When pressing [L] at
			Daily
								the current date, the
			MON-SAT
								date will change as
			MON-FRI					follows.
			SAT					e.g.) January 1st
			FRI
			SUN
			JAN/31
	Use [K / L / s / B] or
	[the Number buttons] to enter the
4 start and end time, then press [B].
			Date	Start				End
			JAN/07	12	: 00AM			- - : - -
			L1/L2	Mode
			L1		SP
							SP 2h00m

•You cannot make a program which recording time exceeds 12 hours.

28 EN