Makita DPC 9500, DPC 7000, DPC 9501, DPC 7001 Use only original Makita spares and accessories

Maintenance

-Beforeperformingmaintenanceworkswitch off the Power Cut (27) and pull out the plug cap.

-Always check the Power Cut before using it to make sure that it is in good working order. In particular, make sure that the cutting disc is properly mounted.

-Operate the Power Cut only at a low noise and emission level. For this ensure the carburetor is adjusted correctly.

-Clean the Power Cut regularly.

-Check the fuel tank cap regularly for good sealing.

Observe the accident prevention instructions issued by tradeassociationsand insurancecompanies.NEVER make any modifications to the Power Cut! You will only be putting your own safety at risk!

Perform only the maintenance and repair works described in the owner’s manual. All other work must be carried out by MAKITA Service.

Use only original MAKITA spares and accessories.

The use of non-MAKITA spares, accessories, or cutting discs increases the risk of accident. We cannot accept any respon- sibility for accidents or damage occurring in association with the use of cutting discs or accessories other than original

MAKITA.

First aid

For the event of a possible accident, please make sure that a first aid kit is always immediately available close by. Immedi- ately replace any items used from the first aid box.

When calling for help, give the following information:

-Place of the accident

-What happened

-Number of injured people

-Kind of injuries

-Your name!

I

I

27

SERVICE

28

29

10