Makita DPC 9500, DPC 7000 Thank you for purchasinga Makita product, Table of contents, Packing

Thank you for purchasinga MAKITA product!

Congratulations on choosing a MAKITA Power Cut cutoff saw! We are confidentthat you will be satisfiedwith this modernpiece of equipment. Like our chain saws. the MAKITA Power Cuts feature specially designed high-performance engines with out- standing power-to-weight ratios. for heavy-duty yet lightweight tools.

Other advantages of the MAKITA Power Cuts: Sturdyconstruction and high reliability.

Maintenance-free electronic ignition. hermetically sealed to protect against dust and moisture.

Vibration damping with the 2-mass system (D2M) for tireless working even when guiding the Power Cut by hand.

Three-stageair-filtersystemfor reliableoperationeven in very dusty conditions.

Two options for mounting the cutter attachment: Either cen- trally. for good balance when guiding the unit manually. or on the side. for flush cuts along walls or curbsides or horizontally directly above the ground.

Extensive line of synthetic-resin and diamond cutting discs. and trolley with vibration damping. dust catcher. and several systems for water supply to the cutting disc.

We want you to be satisfied with your MAKITA product.

In order to guarantee the optimal function and performance of your Power Cut and to ensure your personal safety we would request you to perform the following:

Read this owner’s manual carefully before putting the Power Cut into operation for the first time. and strictly observe the safety regulations.

Table of contents	Page
Packing
Delivery inventory
Symbols	3
SAFETY PRECAUTIONS	4
General precautions	4
Protectiveequipment	4-5
Fuels/ Refuelling	5
Putting into operation	5
Cutting discs	6
Kickbackand lock-in
Working behavior/ Method of working ....
Cutting metal	8
Cutting masonry	8.9
Transport and storage	9
Technical data	11
Denomination of components	11
PUTTING INTO OPERATION	12
Installing the drive arm
and mounting the cutting disc .	12-13
Tightening the V.belt	13
Mounting thecutting disc	13-14
Fuels / Refuelling	14-15
Starting the engine	15
Cold-starting	15
Warm-starting	15
If the engine won’t start	15
Stopping the engine	15
Adjusting the carburetor	16
MAINTENANCE	17
Changing the V-belt	17
Cleaning the protection hood	17
Cleaning /changing the air filter	18
Replacing the spark plug	18
Replacing the suction head	19
Replacing the starter cable
Replacing the return spring
Instructions for periodic maintenance	23
Cutting attachment in central / side position	20
Repositioning the cutting attachment
(DPC 7000, DPC 7001) .	20-21
Repositioning the cutting
(DPC 9500, DPC 9501)	21
SPECIAL ACCESSORIES	22
Diamond cutting discs, trolley. water tank
and pressure water system	22
Service, spare parts and guarantee	23-24
Trouble shooting .	24
Extract from spar	25
Accessories	25
Service centers in the USA	50
Notes	51

Packing

Your MAKITA Power Cut is packed inacardboard box to prevent shipping damage.

Cardboardis a basic raw materialand isconsequentlyreuseable or suitable for recycling (waste paper recycling).

2