P 5/ 22
Repair
[4]DISASSEMBLY/ASSEMBLY [4]-3. Shaft pipe complete (cont.)
DISASSEMBLING
For 4351UH:
(5A) Loosen M5x18 Hex socket head bolt and remove Shaft pipe complete from Pipe housing. (Fig. 11)
(6A) Pull out Shaft from Shaft pipe complete.
For 4350UH:
(5B) Remove two M6x25 Hex socket head bolts and Pipe clamp, then separate Bike handle section from Shaft pipe complete. (Fig. 12)
(6B) Remove the following parts from Shaft pipe complete.
• Wire clamp (2 pcs.) • Hanger set • Shaft (Fig. 13)
For 4350LH:
(5C) Remove four M5x30 Hex socket head screws, then remove Handle clamp 28 and then remove Loop handle 28. (Fig. 14)
(6C) Loosen two M5x14 Hex socket head bolts, then separate Lever case set from Pipe shaft complete. (Fig. 15)
(7C) Remove the following parts from Pipe shaft complete.
• Hanger set • Spacer • Shaft
Fig. 11 | Fig. 12 |
Pipe housing |
|
M5x18 Hex socket head bolt | Shaft pipe |
Fig. 13 | Fig. 14 |
Bike handle section
Shaft pipe complete
Pipe clamp | M6x25 Hex |
| |
| socket head bolt |
| Fig. 15 |
Shaft | Wire clamp (2 pcs.) |
| |
Shaft pipe |
|
complete | Hanger set |
|
M5x30 Hex socket head screw (4 pcs.)
Loop handle 28
Handle clamp 28 | Shaft pipe |
complete |
Control lever assembly |
M5x14 Hex socket |
head bolt (2 pcs.) |
