Makita EM4351UH, EM4350UH, EM4350LH specifications For 4351UH, For 4350LH and 4350UH

Repair

P 10/ 22

[4]DISASSEMBLY/ASSEMBLY

[4]-6. Clutch drum (cont.)

ASSEMBLING

For 4351UH:

(1) Press-fit Ball bearing 6004LLU to Clutch drum with 1R031 in Fig. 40.

Note: Put Retaining ring (INT) R-42 between Ball bearing 6004LLU and Clutch drum in advance.

(2)Set Retaining ring (EXT) WR-20 in the groove on Clutch drum.

(3)Put Clutch case on the table of Arbor press horizontally without tilt, and press-fit Clutch drum into Clutch case with 1R286. (Fig. 41)

(4)Set Retaining ring (INT) R-42 to the inner groove of Clutch case.

(5)Assemble by reversing the disassembly procedure.

Fig. 40

Arbor press Clutch drum

Retaining ring (INT) R-42

Ball bearing 6004LLU 1R031

Fig. 41

1R286

Clutch case

For 4350LH and 4350UH:

(1) Press-fit Ball bearing 6003LLU to Clutch drum with 1R031 in Fig. 42.

Note: Put Retaining ring R-35 between Ball bearing 6003LLU and Clutch drum in advance.

(2)Set Retaining ring S-17 in the groove on Clutch drum.

(3)Put Clutch case on the table of Arbor press horizontally without tilt, and press-fit Spacer and Clutch drum into Clutch case with 1R286. (Fig. 43)

(4)Set Retaining ring R-35 to the inner groove of Clutch case.

(5)Assemble by reversing the disassembly procedure.

Fig. 42

Arbor press Clutch drum

Retaining ring R-35 Ball bearing 6003LLU

1R031

Fig. 43

1R286

Clutch case

Spacer

(Refer to Fig. 39 of

the previous page.)