Clutch drum | Makita EM4350UH, EM4351UH, EM4350LH guide

P 9/ 22

Repair

[4]DISASSEMBLY/ASSEMBLY

[4]-6. Clutch drum

DISASSEMBLING

For 4351UH: Refer to Parts breakdown in Fig. 35.

(1A) Remove four M6x20 Hex socket head bolts, then separate Clutch case from Engine. (Fig. 33)

(2A) Remove Retaining ring (INT) R-42 in Clutch case with 1R006. (Fig. 33)

(3A) Put 1R247 on Clutch drum in Clutch case, press down Clutch drum using Arbor press. (Fig. 34) Note: If it is difficult to remove Clutch drum from Clutch case, warm Clutch case with a heat gun.

(4A) Remove Retaining ring (EXT) WR-20 from Clutch drum with 1R004.

(5A) Remove Ball bearing 6004LLU from Clutch drum with 1R045.

Fig. 32

Fig. 34

Fig. 35

Engine

Clutch case

M6x20 Hex

socket head screw

(4 pcs.)

Fig. 33

Arbor

press

1R247

Clutch

case

Clutch case

Retaining ring (EXT) WR-20

Inside view of Clutch case

Clutch drum

Holes for access to Retaining ring (INT) WR-42

Clutch case

Clutch drum

Ball bearing 6004LLU

Retaining ring (INT) WR-42

Clutch drum

For 4350UH and 4350LH: Refer to Parts breakdown in Fig. 39.

(1B) Remove four M6x20 Hex socket head bolts, then separate Clutch case from Engine. (Fig. 36)

(2B) Remove three M5x20 Hex socket head bolts, then separate Pipe retainer from Clutch case. (Fig. 36)

(3B) Remove Retaining ring R-35 in Clutch case with 1R006. (Fig. 37)

(3B) Put 1R247 on Clutch drum in Clutch case, press down Clutch drum using Arbor press. (Fig. 38) Note: If it is difficult to remove Clutch drum from Clutch case, warm Clutch case with a heat gun.

(4B) Remove Retaining ring S-17 from Clutch drum with 1R004.

(5B) Remove Ball bearing 6003LLU from Clutch drum with 1R045.

Fig. 36