Makita HS7100, HS7101 specifications Put on the edge

P 9/16

Repair

[3] DISASSEMBLY/ASSEMBLY

[3] -5. Blade Case, Blade Cover, Safety Cover

DISASSEMBLING

(5)Remove Blade cover as described in Fig. 9.

Fig. 9

1.Remove two M4x12 Pan head screws.

Blade case

2.Grab Blade cover at the tab and the bottom with your forefinger and thumb, then lift it up a little and put the rib portion of Blade case on the edge of Blade case.

tab

3.Pull off Blade cover from Blade case by sliding it

in the direction of the arrow.

	rib portion,
Blade cover	put on the edge
	of Blade case

ASSEMBLING

(1)Mount Bearing box on Blade case. (See the right illustration in Fig. 8.)

(2)Mount Tension spring 4 on Blade case and Safety cover as described in Fig. 10.

Fig. 10

Blade side

Insert the hook from Blade side to Motor housing side.

Blade case

Tension spring 4

Motor housing side

Safety cover

Insert the hook from Motor housing side to Blade side.

(3)Set Retaining ring S-42 in place with 1R003. (See the left illustration in Fig. 8)

(4)Take the reverse step of Disassembling. (Fig. 7)